Specifications

CAENIB
A
utomation Enclosures
 Modular enclosures for PAC2, PAC2M,
and CLXI-Series lighting modules
 UMP universal mounting plates accommodate
additional devices
 Available in 5 sizes – over 100 possible
circuits in one enclosure!
 Provides a clean and manageable installation
 Surface or flush wall mount installation
 Centralized or distributed configurations
 Also suited for voice and data, security, and
RF signal distribution
 UL and UL-C Listed
CLXI-2DIM8
Dimmer module
 2 Feed, 8 channel dimmer module
10 Amps per channel (2300 Watts)
Per group: Channels 1-4: 13 Amps (2990 Watts)
Per group: Channels 5-6: 13 Amps (2990 Watts)
26 Amps Total Module Load (5980 Watts)
Load Types: Incandescent, Magnetic Low-voltage,
Neon/Cold Cathode, Dimmable 2-Wire Fluorescent
Power Requirements: 2X 16 Amps @ 230 Volts AC,
50Hz, single-phase; Feeds must be same phase
or split phase
CLXI-2DIM2
Dimmer Module
 2 Feed, 2 channel dimmer module
10 Amps per channel (2300 Watts)
20 Amps Total Module Load (4600 Watts)
Load Types: Incandescent, Magnetic Low-voltage,
Neon/Cold Cathode, Dimmable 2-Wire Fluorescent
Power Requirements: 2X 16 Amps @ 230 Volts AC,
50Hz, single-phase; Feeds must be same phase or
split phase
CLXI-1DIM4
Dimmer Module
 Single Feed, 4 channel dimmer module
10 Amps per channel (2300 Watts)
13 Amps Total Module Load (2990 Watts)
Load Types: Incandescent, Magnetic Low-voltage,
Neon/Cold Cathode, Dimmable 2-Wire Fluorescent
Power Requirements: 16 Amps @ 230 Volts AC,
50Hz, single-phase;
CLXI-1DELV4
Low-Voltage Dimmer Module
4 Channel Electronic Low-Voltage Dimmer Module
10 Amps per channel (2300 Watts)
13 Amps Total Module Load (2990 Watts)
Load Types: Electronic Low-Voltage, Incandescent
Power Requirements: 16 Amps @ 230 Volts AC,
50Hz, single-phase;
CLXI-1MC4
Motor Control Module
 Single Feed, 4 channel motor control module
8 Amps per channel, 1HP
13 Amps Total Module Load
Load Types: 3-Way Bidirectional Motors
Power Requirements: 16 Amps @ 230 Volts AC,
50Hz, single-phase
CLXI-4HSW4
High in-ruch Swith Module
 4 Feed, 4 channel high in-rush switch module
8 Amps per channel, 1HP
32 Amps Total Module Load
Load Types: Incandescent, Fluorescent,
Low-voltage, Neon/Cold Cathode, High-Intensity
Discharge (HID), Motors
Power Requirements: 4X 16 Amps
@ 230 Volts AC, 50Hz
PAC2
Professional Automation
C
ontrol System
PAC2M
Professional Automation
Mini Control System
 Highest performance and reliability for any
lighting application
 257 MIPS 2-Series engine
 4GB Compact Flash memory card slot
 Backup processor capability
 Built-in 32-port Cresnet distribution and 8-segment
hub/repeater
 Optional 10/100 Ethernet | e-Control 2 ready
 RoomView and SNMP Support
 Built-in firewall, NAT and router
 8 relay and 8 I/O Versiport control ports
 Accepts 2 Y-Bus and 1 Z-Bus control cards
 Occupies 1 module space in a single-width CAEN
enclosure, or 2 spaces in a double-width enclosure
 Internal power supply
 Complete system design, development, and
documentation using D3 Pro software
 A compact, low-cost alternative to the PAC2
 66 MIPS 2-Series engine
 1GB MMC memory card slot
 Built-in 8-port Cresnet distribution and 2-segment
hub/repeater
 Built-in 10/100 Ethernet | e-Control 2 enabled
 4 relay and 4 digital input control ports
 Occupies a single module space in any
CAEN enclosure
 Requires external power supply
NEWNEW
ww w.c restro n. eu
® 2007 Crestron Electronics, Inc. Specifications subject to change.
Please contact Crestron International for specific availability.
20
Lighting - International version (230 V)
Automation Enclosures