Installation guide

Crestron CEN-WAP-ABG 802.11a/b/g Wireless Access Points
802.11a/b/g Wireless Access
Points: CEN-WAP-ABG
Introduction
NOTE: Unless otherwise noted, references in this manual to CEN-WAP-ABG
apply to both the CEN-WAP-ABG-1G and CEN-WAP-ABG-CM wireless
access points.
CEN-WAP-ABG wireless access points enable wireless communication for
Crestron
®
Wi-Fi touchpanels, 2-Series control systems, computers, and other
devices. With IEEE 802.11a/b/g support, easy setup, flush-mount installation, and
enterprise level security and management capabilities, a CEN-WAP-ABG delivers
an ideal wireless access point solution for any application.
Features and Functions
• Supports 802.11a, 802.11b, and 802.11g protocols
• Single-wire hookup using Power over Ethernet (PoE)
• Secure network with no configuration required
• Web-browser configuration and management
• Enterprise level security
• Built-in DHCP server
• MAC address filtering
• On-board event logging
• SNMP and UPnP configuration and management
• Bridge mode for wireless LAN-to-LAN capability
• Ethernet control system interface
• Front-panel LAN pass-through port (CEN-WAP-ABG-1G only)
• Attractive flush wall mount (CEN-WAP-ABG-1G) or low-profile
ceiling mount (CEN-WAP-ABG-CM) design
Operations & Installation Guide – DOC. 6695C 802.11a/b/g Wireless Access Points: CEN-WAP-ABG • 1