Installation guide

Crestron CEN-WAP-ABG 802.11a/b/g Wireless Access Points
To mount the CEN-WAP-ABG-CM to a ceiling:
1. Remove the cover by inserting a screwdriver into the notch at the bottom of the
access point and pushing the base of the unit upward until it detaches from
the cover.
CEN-WAP-ABG-CM Cover Removal
2. Attach the access point to the bracket or electrical box using the two #6-32 x ¾”
Phillips pan head screws included with the access point.
CEN-WAP-ABG-CM Ceiling Mounting
3. Reattach the cover by aligning the four tabs inside the cover with the rectangular
holes in the base of the access point and pushing the cover until it snaps
into place.
CEN-WAP-ABG-CM Cover Reattachment
Operations & Installation Guide – DOC. 6695C 802.11a/b/g Wireless Access Points: CEN-WAP-ABG • 13