Installation guide

Crestron CEN-WAP-ABG 802.11a/b/g Wireless Access Points
CEN-WAP-ABG-CM Connectors, Control & Indicators (Front and Rear)
1
2
3
4
Connectors, Control & Indicators
# CONNECTORS,
CONTROL &
INDICATORS
DESCRIPTION
1 LAN
(1) Green LED: Solid green indicates link
status of the Ethernet port;
Flashing green indicates Ethernet activity
through the Ethernet port.
2 Reset
(1) Recessed push button that resets the
device.*
3
Wi-Fi (1) Green LED: Solid green indicates
wireless network connection;
Flashing green indicates wireless data
activity.
4
NETWORK PoE
NETWORK
PoE
(1) 8-wire RJ-45 connector;
10BaseT/100BaseTX Ethernet and PoE
input port;
Connects to IEEE 802.3af-compliant PoE
power source.
* To press the Reset button, use the end of a paper clip. Pressing the Reset button for eight seconds
resets the configuration settings of the unit to factory-default settings.
Operations & Installation Guide – DOC. 6695C 802.11a/b/g Wireless Access Points: CEN-WAP-ABG • 9