Specifications

Crestron CEN-SWPOE-16 16-Port Managed PoE Switch
Operations Guide – DOC. 7408B 16-Port Managed PoE Switch: CEN-SWPOE-16
•
3
CEN-SWPOE-16 Specifications (Continued)
SPECIFICATION DETAILS
Available Accessories
CBL-CAT5E-P-50
Ethernet LAN Cable, Plenum, 50 ft
DM-CBL-8G-NP-SP500
DigitalMedia 8G™ Cable, non-plenum
DM-CBL-8G-P-SP500
DigitalMedia 8G Cable, plenum
DM-8G-CONN-100
DigitalMedia 8G Cable Connector,
100-Pack
DM-8G-CRIMP
Crimping Tool for DM-8G-CONN
MP-WP183-[A,B,W]
Media Presentation Wall Plate – Ethernet
MPI-WP183-[120,122] Media Presentation Wall Plate –
International Version – Ethernet
1. Consideration should be given to the connection of the equipment to the supply circuit and the effect
that overloading of the circuits might have on over current protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when addressing this concern.
2. Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be
given to supply connections other than direct connections to the branch circuit (for example, use of
power strips).
3. If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack
environment may be greater than room ambient temperature. Therefore, consideration should be given
to installing the equipment in an environment compatible with the maximum ambient temperature
specified by the manufacturer.
4. Installation of the equipment in a rack should be such that the amount of air flow required for safe
operation of the equipment is not compromised.
5. Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due
to uneven mechanical loading.
Physical Description
This section provides information on the connections, controls and indicators
available on the CEN-SWPOE-16.
CEN-SWPOE-16 Physical View (Front View)
CEN-SWPOE-16 Physical View (Rear View)
CEN-SWPOE-16 Overall Dimensions (Front View)
1 2
5
3
4
1.70 in
(44 mm)