Specifications

Crestron CEN-SWPOE-16 16-Port Managed PoE Switch
Operations Guide DOC. 7408B 16-Port Managed PoE Switch: CEN-SWPOE-16
1
Rack-mount 16-port managed 10/100 Ethernet switch
All ports support 1000BASE-T Gigabit Ethernet
Provides full PoE (802.3at Type 1) on all ports simultaneously
Also supports PoE+ (802.3at Type 2) powered devices
Provides up to 34.2 watts per port, 255 watts total
PoE switchable per port via a control system
Auto-negotiating and auto MDI/MDIX
Layer 2 managed switching functionality
16-Port Managed PoE Switch:
CEN-SWPOE-16
Introduction
The CEN-SWPOE-16 offers control system networking made easy, providing
Crestron
®
guaranteed performance and reliability for a complete Ethernet network of
touch screens, control processors, servers, and other devices in a single-space rack
mount package. All 16 ports are gigabit capable to ensure maximum bandwidth for
multimedia and critical control data. All ports are located on the rear of the unit
while the front panel provides clear indication of each port’s status, providing an
ideal form factor for use in a typical 19” AV equipment rack. Customizable front
panel labeling makes it easy to designate each port with a friendly, descriptive name.
Power over Ethernet (PoE) is furnished simultaneously across all 16 ports, providing
a centralized power source for numerous PoE powered devices and eliminating the
need for cumbersome power supplies and extra wiring. The CEN-SWPOE-16
provides full PoE (802.3at Type 1) from all 16 ports simultaneously. It also supports
PoE+ (802.3at Type 2) from any port, delivering a maximum of 34.2 watts per port
up to a total of 255 watts for all ports. PoE at each port can be switched on and off
via a Crestron control system allowing equipment to be shut down to save power
when not needed.
Advanced configuration of the CEN-SWPOE-16 is enabled through an intuitive Web
browser interface. Port mirroring capability allows for monitoring and
troubleshooting.
Features and Functions
(Continued on following page)