Specifications

16-Port Managed PoE Switch Crestron CEN-SWPOE-16

•

16-Port Managed PoE Switch: CEN-SWPOE-16 Operations Guide – DOC. 7408B

mask, and default router. It also allows changes to the host name, domain name,

ports, and DNS servers.

Click Modify IP Table to set up a connection between a control system and the

switch, allowing the switch to be controlled with a Crestron Studio or SIMPL

Windows program.

Using a Web Browser

To access the configuration utility from a Web browser:

1. Start the Web browser.

2. Enter the IP address or host name of the switch in the browser URL field.

NOTE: If the default Web management port number of 80 has been

changed, append the port number to the IP address by entering a colon

followed by the new port number. If, for example, the IP address is

192.168.100.16 and the Web management port number has been changed

from 80 to 150, go to http://192.168.100.16:150.

NOTE: For 48 hours after a firmware upgrade, the browser cache must be

cleared after each login to the Web-based configuration utility. If the cache

is not cleared, the browser may not display the login page. Refer to release

notes for more details.

3. Log in to the switch by entering the username and password on the “Login”

screen. The default username is admin, and the default password is admin.

NOTE: The “Login” screen lists minimum versions of browsers and

operating systems fully supported by the Web-based configuration. Be sure

to use a supported browser to log in to the switch.