Specifications

Crestron CEN-SWPOE-16 16-Port Managed PoE Switch

Operations Guide – DOC. 7408B 16-Port Managed PoE Switch: CEN-SWPOE-16

•

NOTE: The Device Discovery Tool can also be accessed by clicking the

Device Discovery Tool icon ( ) in the toolbar.

NOTE: The security software running on the computer may send a

program alert regarding the attempt by Crestron Toolbox to connect to the

network. Allow the connection so the Device Discovery Tool can be used.

3. From the device list on the left side of the screen, select the name of the

switch. The default name is CEN-SWPOE-16.

No login is required when accessing the switch through Crestron Toolbox. After the

device is selected, options for upgrading firmware and modifying the Ethernet

settings and IP table appear on the screen as shown below. Refer to the Crestron

Toolbox help files for more information about using these features.

Crestron Toolbox Window (Device Settings)

Click Firmware to upgrade device firmware. The “Firmware” window displays the

model of the device and the current firmware version. To upgrade, click Browse and

select the file containing the new firmware from the Crestron Web site. Click

Upgrade to start the firmware upgrade process. The switch reboots automatically

when the upgrade is complete.

NOTE: Read the release notes before upgrading the firmware.

NOTE: For 48 hours after a firmware upgrade, the browser cache must be cleared

after each login to the Web-based configuration utility. If the cache is not cleared,

the browser may not display the login page.

Click Ethernet Settings to modify the device’s Ethernet settings. The “Ethernet

Addressing” window allows enabling or disabling of Ethernet, DHCP, and WINS. If

DHCP is disabled, this window allows manual changes to the IP address, IP subnet