Specifications

High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB
40 • High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB Operations Guide – DOC. 7157C
Defaults Screen 2 (Showing “All settings” Option)
Restore Defaults
All settings
Defaults Screen 2 (Showing “Abort” Option)
Restore Defaults
Abort
Press ENTER to select the new setting. The display asks Are you sure? to confirm
that default settings should be restored.
“Are you sure?” Screen
Are you sure?
Yes No
To restore defaults, press the button below Yes. After a short pause, the screen
briefly displays a “Restored defaults” message (if any defaults are reset), then returns
to the “Defaults” screen. Use the quick-adjust knob to select another Control Setup
parameter. The next parameter is Front Panel.
Control:
Front Panel
“Front Panel” Screen
Control Setup
Front Panel
To turn the front panel lock on or off, press ENTER. Use the quick-adjust knob to
set the front panel lock on or off.
Front Panel Screen 2
Front Panel Lock:
*Off
An asterisk to the left of the front panel lock option shows the current setting.
Press ENTER to save the new setting. The display returns to the “Front Panel”
screen. Use the quick-adjust knob to select another Control Setup parameter or press
MENU to return to the “Control Setup” category screen.
You can then use the quick-adjust knob to select another category or press MENU
again to display the “Exit Setup Menu” screen.