Specifications

High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB
36 • High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB Operations Guide – DOC. 7157C
Backlight Screen 2
Select Brightness
Bklt Low
An asterisk to the left of the backlight option shows the current setting.
Backlight Screen 2 (Showing Backlight Set to High)
Select Brightness
*Bklt High
NOTE: The backlight setting is in effect while the unit is on. It is not saved across
reboots.
Press ENTER to return the display to the “Backlight” screen. Use the quick-adjust
knob to select another Control Setup parameter. The next parameter is Password.
Control:
Password
“Password” Screen
Control Setup
Password
To set a password, press ENTER.
Password Screen 2
Del Ins < >
Use the buttons below the < and > symbols on the display to navigate to a digit to
set. Use the buttons below Del and Ins to delete and/or insert digits. Change a digit
by rotating the quick-adjust knob.
Press ENTER to save the new setting. The display returns to the “Password” screen.
Use the quick-adjust knob to select another Control Setup parameter. The next
parameter is Info.
Control:
Info
“Info” Screen
Control Setup
Info
To view information about the CEN-RGBHVHB, press ENTER.