Specifications

High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB
32 • High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB Operations Guide – DOC. 7157C
Network Setup
“Network Setup” Screen
Setup Menu
Network Setup
Press the ENTER button to select a parameter of the “Network Setup” menu to
view. From any of the parameter level menus, select a different parameter by using
the rotary quick-adjust knob on the front panel.
For example, pressing the ENTER button from the Network Setup menu displays
one of the following parameters:
• IP Address
• Subnet Mask
• Def. Router
• DHCP
• HostName
• MAC Address
Any of the other parameters of the Network Setup menu can be changed using the
quick-adjust knob. Press the ENTER button when the desired parameter appears on
the screen.
Network:
IP Address
“IP Address” Screen
Network Setup
IP Address
To set the IP address, press the ENTER button.
IP Address Screen 2
IP Address
[123] 456. 789. 000
Use the quick adjust knob to set the values for the first three digits in the IP address.
Then press ENTER to move the brackets to the next three digits and use the
quick-adjust knob to set the values for these. Use the ENTER button and
quick-adjust knob to set the values for next two groups of three digits.
Press ENTER to save the IP address. The display returns to the “IP Address” screen.
Use the quick-adjust knob to select another Network Setup parameter. The next
parameter is Subnet Mask.