Specifications

Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher
Operations Guide – DOC. 7157C High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB • 29
Input Name Setup Screen
IN1
Del Ins < >
Use the buttons below the < and > symbols on the display to navigate to the being
set. Use the buttons below Del and Ins to delete and/or insert digits. Change a digit
by rotating the quick-adjust knob.
Press ENTER to save the new setting. The display returns to the “Sel. input to
name” screen. Use the quick-adjust knob to select another input or press MENU to
return to the “Input Names” screen. From the “Input Names” screen, use the
quick-adjust knob to select another Video Setup parameter. The next parameter is
Output Names.
Video:
Output Names
“Output Names” Screen
Video Setup
Output Names
To set up an output name, press the ENTER button.
“Sel. output to name” Screen
Sel. output to name
1:OUT1
Use the quick-adjust knob to select the output being named. Then press ENTER.
Output Name Setup Screen
OUT1
Del Ins < >
Use the buttons below the < and > symbols on the display to navigate to a digit to
set. Use the buttons below Del and Ins to delete and/or insert digits. Change a digit
by rotating the quick-adjust knob.
Press ENTER to save the new setting. The display returns to the “Sel. output to
name” screen. Use the quick-adjust knob to select another output or press MENU to
return to the “Output Names” screen. From the “Output Names” screen, use the
quick-adjust knob to select another Video Setup parameter. The next parameter is
Video Blanking.
NOTE: Blanking may be enabled/disabled separately for audio and video. Blanking
is used to ensure that no flickering occurs on the video output as the new sync
signals are sent to the display. Audio blanking may be used to mute the audio signal
during video blanking.