Specifications

High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB
22 • High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB Operations Guide – DOC. 7157C
Password Entry Screen
Del Ins < >
The default password for the CEN-RGBHVHB is 12345. You can change the
password using the Control Setup / Password screen (refer to “Control: Password”
on page 40).
Use the buttons below the < and > symbols on the display to navigate to a digit to
set. Use the buttons below Del and Ins to delete and/or insert digits. Change a digit
by rotating the quick-adjust knob. When the password in entered, press ENTER to
go to the setup menus.
When the setup menus are used for the first time, after password entry, the system
displays the main “Audio Setup” screen. If the setup menus have previously been
used, the system displays the first screen in the last used category. From any of the
top level menus, a different category can be selected by using the rotary quick-adjust
knob on the front panel.
NOTE: The

and  symbols in the lower right corner of the display show
whether there are screens available above and/or below the presently displayed
screen.
To exit the Setup Menu screens, press the MENU button repeatedly until the Exit
Setup Menu screen appears, as shown below. (The number of presses required
varies depending on the current location in the menu structure.) Then press the
button below Yes.
“Exit Setup Menu” Screen
Exit Setup Menu?
Yes No
Audio Setup
“Audio Setup” Screen
Setup Menu
Audio Setup
Press the ENTER button to select a parameter of the “Audio Setup” menu to view.
From any of the parameter level menus, a different parameter can be selected by
using the rotary quick-adjust knob on the front panel.
For example, pressing the ENTER button from the Audio Setup menu displays one
of the following parameters:
• Input Compensation
• Output Volume
• Input Names