Specifications

Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher
Operations Guide – DOC. 7157C High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB • 15
To install the ears:
CAUTION: To prevent equipment damage, use only the rack ears Crestron
provides for this device.
1. There are screws that secure each side of the CEN-RGBHVHB top cover.
Using a #1 or #2 Phillips screwdriver, remove the three screws closest to
the front panel from one side of the unit. Refer to the diagram following
step 3 for a detailed view.
2. Position a rack ear so that its mounting holes align with the holes vacated
by the screws in step 1.
3. Secure the ear to the unit using the longer #6-32 screws that came packed
separately with the unit, as shown in the following diagram.
Ear Attachment for Rack Mounting
Use Longer Screws
That Ship With The
Unit
4. Repeat procedure (steps 1 through 3) to attach the remaining ear to the
opposite side.