Specifications

Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher
Operations Guide – DOC. 7157C High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB • 11
Connectors, Controls & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
16 (VIDEO) IN (8 or 12)
2
sets of (5) BNC female;
RGB, component, S-video, or composite video
inputs;
Formats: RGBHV, RGBS, RGsB, YUV, YPbPr,
Y/C, NTSC, PAL;
RGB input level: 1 Vp-p with ±0.5 Vdc offset
maximum;
RGB input impedance: 75 Ω nominal;
Sync input types: RGBHV, RGBS
4
, RGsB
4
,
YPbPr
4
;
Sync input level: 3 to 5 Vp-p;
Sync input impedance: 75 or 510 Ω,
independently selectable for H and V per input;
Sync detection: Reports discrete H and V
signal presence and sync rates per input
17 (VIDEO) OUT (4 or 8)
3
sets of (5) BNC female;
RGB, Component, S-video, or composite video
outputs;
Formats: Same as selected input;
RGB output level: Same as selected input;
RGB output impedance: 75 Ω nominal;
Sync output type: Same as selected input;
Sync output level: 5 Vp-p
18 LAN
Green
LED
Amber
LED
Pin 1
Pin
8
(1) 8-wire RJ-45 female (8P8C modular jack)
with two LED indicators;
10BASE-T/100BASE-TX Ethernet port;
Green LED indicates Ethernet link status;
Amber LED indicates Ethernet activity;
PIN
SIGNAL
PIN
SIGNAL
1
TX +
5
N/C
2
TX -
6
RC -
3
RC+
7
N/C
4
N/C
8
N/C
19 G (1) 6-32 screw, chassis ground lug
20 NET
G
Z
Y
24
(1) 4-pin 3.5 mm detachable terminal block;
Cresnet slave port, connects to Cresnet control
network;
Does not draw power from the network
(Continued on following page)