Specifications

High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB
4 • High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB Operations Guide – DOC. 7157C
CEN-RGBHVHB Specifications (Continued)
SPECIFICATION DETAILS
Audio (Continued)
Signal Types Balanced and unbalanced stereo analog line
level
• Typical of Stereo Inputs:
Analog to Digital Conversion 24-bit 48 kHz
Input Compensation ±10 dB per input
• Last input only,
Paging Mode:
Mix Input Level 0 to 100%
Sensing Threshold -80 to 0 dB
Sensing Attack Time 1 to 250 ms
Sensing Hold Time: 1 to 2000 ms
Ducking Depth 0 to 80 dB attenuation
Ducking Release Time 1 to 1000 ms per dB of recovery
• Typical of Stereo Outputs:
Digital-to-Analog Conversion 24-bit 48 kHz
Frequency Response 20 Hz to 20 kHz ±0.5 dB
THD + Noise 0.005%
S/N Ratio >104 dB @ full output, A-weighted
Stereo Separation >104 dB
Output Channel Separation >100 dB
Blanking Time Adjustable 0 to 10 seconds, 0.5 second steps
Output Volume Level Control -80.0 to +20.0 dB, adjustable from 0% to
100% plus mute
Bass Control ±15 dB
Treble Control ±15 dB
EQ Mode
5-band graphic EQ
GEQ Center Frequencies 63, 200, 550, 2 kHz, 12 kHz
GEQ Gain ±12 dB per band
Communications
Ethernet For control and console, 10/100 Mbps,
auto-switching, auto-negotiating,
auto-discovery, full/half duplex, TCP/IP,
UDP/IP CIP, DHCP
Cresnet For control and console, Cresnet slave
USB USB client for computer console
Power Requirements
Main Power 1 amp maximum @ 100-240 volts ac,
50/60 Hz
Power Consumption 30 watts maximum
Cresnet Power Usage None
Default Net ID 33
(Continued on following page)