Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Operations Guide
Important Safety Instructions • • • • • • • • • • • • • • • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Regulatory Compliance This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc. As of the date of manufacture, the CEN-RGBHVHB has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Contents High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications ..............................................................................................................
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB Introduction Crestron® High-Bandwidth RGB Matrix Switchers deliver extreme performance for the most demanding presentation environments.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB 800 MHz Bandwidth Matrix Router The CEN-RGBHVHB is capable of routing up to eight (CEN-RGBHVHB8X4, CEN-RGBHVHB8X8) or 12 (CEN-RGBHVHB12X4, CEN-RGBHVHB12X8) computer or video sources to up to four (CEN-RGBHVHB8X4, CEN-RGBHVHB12X4) or eight (CEN-RGBHVHB8X8, CEN-RGBHVHB12X8) display devices. Its five matrix levels accommodate any combination of analog RGBHV, HD/component, S-video and composite signals.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Customizable label strips are provided on the front panel for clear designation of its inputs and outputs using Crestron Engraver software or standard 3/8” tape labels. Names may also be entered through software to appear on the LCD display during operation. For security, front panel controls can be password protected or locked out.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB CEN-RGBHVHB Specifications (Continued) SPECIFICATION DETAILS Audio (Continued) Signal Types Balanced and unbalanced stereo analog line level • Typical of Stereo Inputs: Analog to Digital Conversion 24-bit 48 kHz Input Compensation ±10 dB per input • Last input only, Paging Mode: • Mix Input Level 0 to 100% Sensing Threshold -80 to 0 dB Sensing Attack Time 1 to 250 ms Sensing Hold Time: 1 to 2000 ms Ducking Depth 0 to 80 dB attenua
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher CEN-RGBHVHB Specifications (Continued) SPECIFICATION DETAILS Environmental Temperature 32º to 104º F (0º to 40º C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 102 Btu/h maximum Enclosure Chassis Metal, matte black finish, convection cooled, vented sides Faceplate Metal, matte black finish, with polycarbonate label overlay Mounting Freestanding or 3U 19-inch rack mountable (adhesive feet and rack ears included) Dimensions H
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Physical Description This section provides information on the connections, controls and indicators available on the CEN-RGBHVHB. CEN-RGBHVHB8X4 Front View CEN-RGBHVHB8X4 Rear View 6 • High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB Operations Guide – DOC.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher CEN-RGBHVHB8X8 Front View CEN-RGBHVHB8X8 Rear View CEN-RGBHVHB12X4 Front View Operations Guide – DOC.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB CEN-RGBHVHB12X4 Rear View CEN-RGBHVHB12X8 Front View CEN-RGBHVHB12X8 Rear View 8 • High-Bandwidth RGB Matrix Switcher: CEN-RGBHVHB Operations Guide – DOC.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher CEN-RGBHVHB8X4, CEN-RGBHVHB8X8, CEN-RGBHVHB12X4, CEN-RGBHVHB12X8 Overall Dimensions (CEN-RGBHVHB12X8 Shown) Operations Guide – DOC.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Connectors, Controls & Indicators 1 # CONNECTORS , CONTROLS & INDICATORS DESCRIPTION 1 LCD Display Green LCD alphanumeric, adjustable backlight, 2 lines x 20 characters per line; Displays inputs/outputs by name, scan rates, audio settings, IP configuration and setup menus 2 Soft Keys (4) push buttons for execution of LCD driven functions 3 MENU (1) push button, steps menu back one level 4 ENTER (1) push button, executes highlighted men
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Connectors, Controls & Indicators (Continued) 1 # CONNECTORS , CONTROLS & INDICATORS DESCRIPTION 16 (VIDEO) IN (8 or 12) sets of (5) BNC female; RGB, component, S-video, or composite video inputs; Formats: RGBHV, RGBS, RGsB, YUV, YPbPr, Y/C, NTSC, PAL; RGB input level: 1 Vp-p with ±0.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Connectors, Controls & Indicators (Continued) 1 # CONNECTORS , CONTROLS & INDICATORS 21 100-240V ~50/60Hz 1.0A Max (1) IEC C14 male chassis plug, main power input; Mates with removable power cord (included) 22 (AUDIO) IN (8 or 12) 5-pin 3.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Setup Network Wiring When wiring the Cresnet network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Use the Crestron Power Calculator to help calculate how much power is needed for the system (www.crestron.com/calculators).
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Installation Ventilation The CEN-RGBHVHB should be used in a well-ventilated area. The venting holes should not be obstructed under any circumstances. To prevent overheating, do not operate this product in an area that exceeds the environmental temperature range listed in the table of specifications. Consider using forced air ventilation and/or incrementing the spacing between units to reduce overheating.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher To install the ears: CAUTION: To prevent equipment damage, use only the rack ears Crestron provides for this device. 1. There are screws that secure each side of the CEN-RGBHVHB top cover. Using a #1 or #2 Phillips screwdriver, remove the three screws closest to the front panel from one side of the unit. Refer to the diagram following step 3 for a detailed view. 2.
High-Bandwidth RGB Matrix Switcher Stacking Crestron CEN-RGBHVHB Four “feet” are provided with the CEN-RGBHVHB so that if the unit is not rack mounted, the rubber feet can provide stability when the unit is placed on a flat surface or stacked. These feet should be attached prior to the hookup procedure. Refer to the following illustration for placement of the feet. Foot Placement for the CEN-RGBHVHB Place Feet In Corners NOTE: No more than two CEN-RGBHVHB units should be stacked.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Hardware Connections for the CEN-RGBHVHB PROFESSIONAL HB VIDEO SWITCHER COMPUTER: To/From PC (VIDEO) OUT: To RGBHV Inputs (VIDEO) IN: From RGBHV Outputs LAN: 10/100 Base-T Ethernet To LAN Ground CRESNET: To Control System and Other Cresnet Devices MAIN POWER INPUT: 100-240V, 50/60Hz 1.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs or firmware) can be transferred to the control system (and/or device).
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher The COMPUTER port on the CEN-RGBHVHB connects to the USB port on the PC via the included Type A to Type B USB cable: TCP/IP 1. Use the Address Book in Crestron Toolbox to create an entry using the expected communication protocol (USB). When multiple USB devices are connected, identify the CEN-RGBHVHB by entering “CEN-RGBHVHB” in the Model textbox, the unit’s serial number in the Serial textbox or the unit’s hostname in the Hostname textbox.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Upgrade CEN-RGBHVHB firmware via Crestron Toolbox. 1. Establish communication with the CEN-RGBHVHB and display the “System Info” window. 2. Select Functions | Firmware… to upgrade the CEN-RGBHVHB firmware. Program Checks Actions that can be performed on the CEN-RGBHVHB vary depending on whether it is connected via Cresnet or Ethernet.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Operation Menu Structure The overall front panel menu structure of the CEN-RGBHVHB is shown in the following illustration. Subsequent paragraphs describe the individual pages and their functions.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Password Entry Screen Del Ins < > The default password for the CEN-RGBHVHB is 12345. You can change the password using the Control Setup / Password screen (refer to “Control: Password” on page 40). Use the buttons below the < and > symbols on the display to navigate to a digit to set. Use the buttons below Del and Ins to delete and/or insert digits. Change a digit by rotating the quick-adjust knob.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher • Output Names • Audio Blanking • Bass • Treble Change to any of the other parameters of the “Audio Setup” menu using the quick-adjust knob. Press the ENTER button when the desired parameter appears on the screen. Audio: Input Compensation “Input Compensation” Screen Audio Setup Input Compensation Input Compensation allows adjustment of the gain for the selected input. To adjust input gain, press the ENTER button.
High-Bandwidth RGB Matrix Switcher Audio: Output Volume Crestron CEN-RGBHVHB “Output Volume” Screen Audio Setup Output Volume To adjust output volume, press the ENTER button. Output Volume Screen 2 To adjust volume, press an output Press a front panel OUT button to select an output to adjust. For example, to lower the output level for output number 1, press the OUT button below 1 on the front panel. The LED above OUT 1 lights and the current output level setting for output 1 is displayed. “Output 1 Vol.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher “Sel. input to name” Screen Sel. input to name 1:IN1 Use the quick-adjust knob to select the input being named. Then press ENTER. Input Name Setup Screen IN1 Del Ins < > Use the buttons below the < and > symbols on the display to navigate to a digit to set. Use the buttons below Del and Ins to delete and/or insert digits. Change a digit by rotating the quick-adjust knob. Press ENTER to save the new setting. The display returns to the “Sel.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB quick-adjust knob to select another Audio Setup parameter. The next parameter is Audio Blanking. NOTE: Blanking may be enabled/disabled separately for audio and video. Blanking is used to ensure that no flickering occurs on the video output as the new sync signals are sent to the display.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Press an appropriate OUT button. The display shows the current bass setting for that output. Bass Setting Screen Output 1 Bass 0.0 dB To adjust the setting, use the quick-adjust knob to set bass gain between -15.0 dB and +15.0 dB Bass Gain Setting Screen Gain 0.0 dB Press ENTER to accept the setting. Press ENTER again to adjust the bass gain for another output; or press MENU to return to the “Audio Setup” category screen.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Treble Gain Setting Screen Gain 0.0 dB Press ENTER to accept the setting. Press ENTER again to adjust the treble gain for another output; or press MENU to return to the “Audio Setup” category screen. Use the quick-adjust knob to select another category. The next category is Video Setup. Video Setup “Video Setup” Screen Setup Menu Video Setup Press the ENTER button to select a parameter of the “Video Setup” menu to view.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Input Name Setup Screen IN1 Del Ins < > Use the buttons below the < and > symbols on the display to navigate to the being set. Use the buttons below Del and Ins to delete and/or insert digits. Change a digit by rotating the quick-adjust knob. Press ENTER to save the new setting. The display returns to the “Sel. input to name” screen. Use the quick-adjust knob to select another input or press MENU to return to the “Input Names” screen.
High-Bandwidth RGB Matrix Switcher Video: Video Blanking Crestron CEN-RGBHVHB “Video Blanking” Screen Video Setup Video Blanking To set video blanking, press ENTER. Use the quick-adjust knob to turn audio blanking on or off. Video Blanking Screen 2 Video Blanking Off An asterisk to the left of the blanking option shows the current setting. Video Blanking Screen 2 (Showing Blanking Set to On) Video Blanking *On Press ENTER to save the new setting. The display returns to the “Video Blanking” screen.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher NOTE: Input termination impedance settings are applied to the H and V sync connections for the selected input. Press ENTER to select between the two values; press MENU to accept the desired value and return to the “Video Setup” category screen. Use the quick-adjust knob to select another category. The next category is Blanking Setup.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Network Setup “Network Setup” Screen Setup Menu Network Setup Press the ENTER button to select a parameter of the “Network Setup” menu to view. From any of the parameter level menus, select a different parameter by using the rotary quick-adjust knob on the front panel. For example, pressing the ENTER button from the Network Setup menu displays one of the following parameters: • IP Address • Subnet Mask • Def.
Crestron CEN-RGBHVHB Network: Subnet Mask High-Bandwidth RGB Matrix Switcher “Subnet Mask” Screen Network Setup Subnet Mask To set the subnet mask, press the ENTER button. Subnet Mask Screen 2 Subnet Mask [255] 255. 255. 000 Use the quick adjust knob to set the values for the first three digits in the subnet mask. Then press ENTER to move the brackets to the next three digits and use the quick-adjust knob to set the values for these.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB DHCP Screen 2 DHCP Off An asterisk to the left of the DHCP option shows the current setting. DHCP Screen 2 (Showing DHCP Set to On) DHCP *On Press ENTER to save the new setting. The display returns to the “DHCP” screen. Use the quick-adjust knob to select another Network Setup parameter. The next parameter is HostName. Network: HostName “HostName” Screen Network Setup HostName To view the host name, press ENTER.
Crestron CEN-RGBHVHB Network: MAC Address High-Bandwidth RGB Matrix Switcher “MAC Address” Screen Network Setup MAC Address To display the MAC Address, press ENTER. Mac Address Screen 2 MAC Address 00.10.6e.05.02.b7 Press MENU to return to the “MAC Address” screen. Use the quick-adjust knob to select another category. The next category is Control Setup. Control Setup “Control Setup” Screen Setup Menu Control Setup Press the ENTER button to select a parameter of the “Control Setup” menu to view.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Backlight Screen 2 Select Brightness Bklt Low An asterisk to the left of the backlight option shows the current setting. Backlight Screen 2 (Showing Backlight Set to High) Select Brightness *Bklt High NOTE: The backlight setting is in effect while the unit is on. It is not saved across reboots. Press ENTER to return the display to the “Backlight” screen. Use the quick-adjust knob to select another Control Setup parameter.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher “Info” Menu Info HW OPS OPS COM The Info submenu is divided into HW (hardware) OPS (operation), and COM (communications) sections. To view information about the CEN-RGBHVHB hardware, press the button below HW. “Hardware Version” Screen Hardware Version: 10001 << >> NOTE: Use the buttons below << and >> to scroll through the information on each screen.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB “TOTAL FLASH” Screen TOTAL FLASH: 8192 KB << >> “FLASH unique id” Screen FLASH unique id: 09b4 2e22 859a 52af << >> << >> “RAM” Screen RAM: RAM “Code” Screen Code: 458 KB / 2153 KB (21%) << >> RAM “Initialized Data” Screen Initialized Data: 6 KB / 2153 KB (0%) << >> RAM “Uninitialized Data” Screen Uninitialized Data: 1684 KB / 2153 KB (0%) << >> RAM “Heap” Screen Heap: 534 KB / 28566 KB (1%) << >> RAM “File System” Screen File
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher “TOTAL RAM” Screen TOTAL RAM: 32768 KB << >> To view the firmware version and serial number of the CEN-RGBHVHB, press MENU to return to the “Info” screen then press the button below OPS. CEN-RGBHVHB Firmware and Serial Number Screen CEN-RGBHVHB8x8 High-Bandwidth Switcher [v1.000.0006, ] << >> Use the buttons below << and >> to scroll through the information. Press MENU to return to the “Info” screen, and press the button below COM.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Defaults Screen 2 (Showing “All settings” Option) Restore Defaults All settings Defaults Screen 2 (Showing “Abort” Option) Restore Defaults Abort Press ENTER to select the new setting. The display asks Are you sure? to confirm that default settings should be restored. “Are you sure?” Screen Are you sure? Yes No To restore defaults, press the button below Yes.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Routing Signals The VIEW button causes the display to show which input signals are routed to which outputs. Pressing the VIEW button causes the LED above the button to light. The display shows the “View Mode” screen. NOTE: At initial startup, default signal routing is input 1 to output 1, input 2 to output 2, etc.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Sync Mode To enter Sync mode, press the SYNC button. The display shows the “Sync Mode” screen. “Sync Mode” Screen Sync Mode Press input To view the horizontal and vertical sync rates of any input, press the numbered IN button for the input to view. The display shows the horizontal and vertical sync rates for that input. For example, to view the sync rates for input number 1, press the IN button below 1 on the front panel.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CEN-RGBHVHB Troubleshooting TROUBLE Device does not function. Poor picture or sound quality. POSSIBLE CAUSE(S) CORRECTIVE ACTION Device is not communicating with the network. Use Crestron Toolbox to poll the network.
High-Bandwidth RGB Matrix Switcher Crestron CEN-RGBHVHB Cable Length Equation 40,000 L< RxP Where: L = Length of run (or chain) in feet R = 6 Ohms (Crestron Certified Wire: 18 AWG (0.75 mm2 )) or 1.6 Ohms (Cresnet HP: 12 AWG (4 mm 2 )) P = Cresnet power usage of entire run (or chain) Make sure the cable length value is less than the value calculated on the right side of the equation.
Crestron CEN-RGBHVHB High-Bandwidth RGB Matrix Switcher Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from Crestron. To obtain warranty service for Crestron products, contact an authorized Crestron dealer. Only authorized Crestron dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 7157C (2030038) 03.13 Specifications subject to change without notice.
