Installation guide

Network Video Streamer Crestron CEN-NVS200
74
•
Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E
Configuring System Log Settings
The CEN-NVS200 can log system messages on the remote server. The protocol is
compliant with RFC 3164. For an external Linux server with syslogd service, use the
“r” option to turn on the facility to receive a log from a remote machine.
Windows software that is compliant with RFC 3164 can also be used.
To configure system log settings, click Configuration on the CEN-NVS200 home
page, then click System Log in the column on the left side of the page. The “System
Log” configuration page opens.
“System Log” Configuration Page
NOTE: The “System Log” configuration page can also be accessed by entering the
following URL in the web browser:
http://Video Streamer/setup/syslog.html
Video Streamer is the host name or IP address of the CEN-NVS200.
To enable the remote log facility:
1. Select the Enable remote log checkbox.
2. Enter the IP address and port number of the log server in the text entry
boxes.
3. Click Save.