Installation guide

Network Video Streamer Crestron CEN-NVS200
72
•
Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E
To configure recording:
1. On the “Recording” configuration page, click Add. The “Recording”
settings page opens.
“Recording” Settings Page
2. In the Recording name: text entry box, enter a unique name for the
recording.
3. Select the Enable this recording checkbox to enable the recording.
4. In the Priority: drop-down list, select the priority of the recording: High,
Normal or Low. The recording with the highest priority is executed first.
5. In the Source: drop-down list, select the source of the video stream:
Stream1, Stream2, Stream 3 or Stream 4.
6. In the Recording Trigger pane, select Schedule to start recording per the
settings made in the Recording Schedule pane or select Network fail to start
recording in the event of a network failure.
7. In the Recording Schedule pane:
a. Select the day(s) of the week that the recording is to occur.
b. Select the time of the recording: Always or enter the desired time
interval in hh:mm format.
8. Use the Destination drop down list to select the storage location for the new
recording.
9. Click Save to save the settings.
The recording name, status, weekly schedule, time schedule, source and
destination are displayed in the Recording Settings pane of the “Recording”
configuration page.