Installation guide

Crestron CEN-NVS200 Network Video Streamer
Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200
•
69
Configuring Media Settings
Up to five media configurations can be set. To configure media:
1. In the Action pane of the “Events and Servers” configuration page,
click Add Media. The “Media Settings” page opens.
“Media Settings” Page
2. In the Media Name: text entry box, enter a unique name for the media.
3. Click one of the following Media Type radio buttons: Snapshot, Video Clip
or System Log.
4. Configure the selected media type by entering the desired information:
Snapshot configuration
Source: Select the source of the stream: Stream1, Stream2, Stream3
or Stream4.
Send pre-event image(s) [0-7]: Enter the number of pre-event images
to be sent. Valid values range from 0 to 7.
Send post-event image(s) [0-7]: Enter the number of post-event images
to be sent. Valid values range from 0 to 7.
File name prefix: Enter the prefix to be added to the file name of the
snapshot images.
Add date and time suffix to file name: Select the checkbox to add time
and date information to the file name.