Installation guide

Crestron CEN-NVS200 Network Video Streamer
Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200
•
67
2. In the Server Name: text entry box, enter a unique name for the server.
3. Click one of the following Server Type radio buttons: Email, FTP, HTTP,
Network storage or Crestron Control System.
4. For the selected server type, enter the appropriate information into the text
entry boxes:
Email configuration
Sender email address: Enter the email address of the sender.
Recipient email address: Enter the email address of the recipient.
Server Address: Enter the domain name or IP address of the external
email server.
User Name: Enter the granted user name on the external email server.
Password: Enter the granted password on the external email server.
Server port: Enter the port number on the external email server.
This server requires a secure connection (SSL): Select the checkbox to
enable SSL encryption.
FTP configuration
Server address: Enter the domain name or IP address of the external
FTP server.
Server port: If desired, replace the default port number with a value
ranging from 1025 to 65535. The default port number is 21.
User name: Enter the granted user name on the external FTP server.
Password: Enter the granted password on the external FTP server.
FTP folder name: Enter the granted folder name on the external FTP
server.
NOTE: The string of characters must conform to that of the external
FTP server. Some FTP servers cannot accept a preceding slash symbol
before the path without virtual path mapping. Refer to the FTP server
documentation for details.
NOTE: The folder privilege must be open for upload.
Passive Mode: Select the checkbox to enable Passive mode
transmission. Passive mode allows the flow of data to be set up and
initiated by the CEN-NVS200 (FTP client) rather than by the FTP
server.
HTTP configuration
URL: Enter the URL to upload the media.
User name: Enter the granted user name on the external HTTP server.
Password: Enter the granted password on the external HTTP server.
Network storage configuration
Network Storage Location: Enter the path to upload the media.
NOTE: Only one network storage is supported.