Installation guide

Crestron CEN-NVS200 Network Video Streamer
Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200
•
59
NOTE: As mentioned in the previous paragraphs, Save must be clicked in order
to save the Patrol selection and Dwelling time settings. If Save is not clicked, the
Patrol selection and Dwelling time settings do not take effect.
• Preset position name: In the text entry box, enter a short name for the
current video view, and the click Add.
NOTE: Entering a very long preset position name causes problems with
the positioning of the camera.
• Preset Position: Provides a list of preset positions:
⇒ To move the camera to a certain preset position, select the desired
position from the drop-down list and then click Go to.
⇒ To delete a certain preset position, select the desired position from the
drop-down list and then click Delete.
Setting Custom Commands
Set custom commands by pressing the Custom Command button on the “Camera
Control” configuration page. The “Custom Command” configuration page opens.
NOTE: Up to five custom commands can be set.
NOTE: If Custom camera is selected as the PTZ driver on the “Camera Control”
configuration page, pan, tilt, zoom and focus functions must be configured by setting
custom commands.
“Custom Command” Page (Not Applicable to Custom Camera)