Installation guide

Crestron CEN-NVS200 Network Video Streamer
Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200
•
49
To preview the image with change(s) before saving the change(s), click Preview.
To recall the previous settings without saving the current settings, click Restore.
To save the change(s), click Save.
To close the page, click Close.
Configuring Privacy Mask
Settings
Configure privacy mask settings by pressing the Privacy Mask button in the Video
Settings pane of the “Audio and Video” configuration page. The “Privacy Mask”
configuration page opens.
“Privacy Mask” Configuration Page
NOTE: The “Privacy Mask” configuration page can also be accessed by entering
the following URL in the web browser:
http://Video Streamer/setup/privacy.html
Video Streamer is the host name or IP address of the CEN-NVS200.
1. Select the Enable privacy mask checkbox to enable privacy mask
window(s). A privacy mask window blocks viewing of an area on the video
output as determined by the privacy mask window settings.
NOTE: Up to five privacy mask windows can be created.
2. Click New. A privacy mask window opens:
• To adjust the size of the window, drag the top, bottom, left, and right
edges of the window frame as desired. The X, Y, Width and Height
values automatically change as appropriate.
• To move the window to block video in a desired location, click the title
bar and drag the window to the desired location. The X and Y values
automatically change as appropriate.
• To delete the window, click X in the upper right corner of the window.
3. In the Window Name text entry box, enter a name for the privacy mask
window. The name is displayed in the title bar of the window.
4. Click Save to save the changes. The privacy mask appears in the video
window as shown in the following illustration.