Installation guide

Network Video Streamer Crestron CEN-NVS200
38
•
Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E
Access name for stream 2: Enter the name to be used by the Crestron MJPEG
Viewer application. For example, when using video2.mjpg (default setting), the
HTTP command to be entered into the Crestron MJPEG Viewer is the following:
/video2.mjpg?user=myuser&pw=secretpassword
video2.mjpg is the default access name.
myuser is the user created for view access.
secretpassword is the password for this user.
Access name for stream 3: Enter the name to be used by the Crestron MJPEG
Viewer application. For example, when using video3.mjpg (default setting), the
HTTP command to be entered into the Crestron MJPEG Viewer is the following:
/video3.mjpg?user=myuser&pw=secretpassword
video3.mjpg is the default access name.
myuser is the user created for view access.
secretpassword is the password for this user.
Access name for stream 4: Enter the name to be used by the Crestron MJPEG
Viewer application. For example, when using video4.mjpg (default setting), the
HTTP command to be entered into the Crestron MJPEG Viewer is the following:
/video4.mjpg?user=myuser&pw=secretpassword
video4.mjpg is the default access name.
myuser is the user created for view access.
secretpassword is the password for this user.
Configuring Two Way Audio
Configure two way audio in the Two Way Audio pane of the “Network”
configuration page.
“Network” Configuration Page – Two Way Audio
Refer to the following two way audio port configuration guideline.
Two Way Audio Port: Enter the port number for the Talk Back feature when using
MPEG-4 streaming. Valid values range from 1025 to 65535. The default port
number is 5060.
Configuring the FTP Port
Configure the FTP port in the FTP pane of the “Network” configuration page.
“Network” Configuration Page – FTP
Refer to the following FTP port configuration guideline.