Installation guide

Crestron CEN-NVS200 Network Video Streamer

Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200

•

NOTE: The “Network” configuration page can also be accessed by entering the

following URL in the web browser:

http://Video Streamer/setup/network.html

Video Streamer is the host name or IP address of the CEN-NVS200.

Refer to the following sections for network configuration guidelines.

Configuring the Network Type

Configure the network type in the Network Type pane of the “Network”

configuration page.

“Network” Configuration Page – Network Type

1. Select the network type by clicking the LAN or PPPoE radio button.

NOTE: Select PPPoE to connect to ADSL networks.

To configure LAN parameters, proceed to step 2. To configure PPPoE

parameters, skip step 2 and continue with step 3.

2. If LAN was selected in step 1, configure LAN parameters:

a. Click either of the following radio buttons:

• Enable DHCP: (Default setting) Allows an IP address to be

obtained automatically from a DHCP server. The address of the

server can be found using the Device Discovery tool in Crestron

Toolbox.