Installation guide

Crestron CEN-NVS200 Network Video Streamer
Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200
•
27
Configuration
CEN-NVS200 configuration pages allow configuring the following settings:
• System settings (refer to “Configuring System Settings” which starts on
page 28 for information)
• Security settings (refer to “Configuring Security Settings” which starts on
page 30 for information)
• Network settings (refer to “Configuring Network Settings” which starts on
page 32 for information)
• DDNS settings (refer to “Configuring DDNS Settings” on page 41 for
information)
• Client access settings (refer to “Configuring Client Access Settings” which
starts on page 42 for information)
• Audio and video settings (refer to “Configuring Audio and Video Settings”
which starts on page 45 for information)
• Motion detection settings (refer to “Configuring Motion Detection Settings”
which starts on page 53 for information)
• Camera tampering settings (refer to “Configuring Camera Tampering
Detection Settings” on page 55 for information)
• Camera control settings (refer to “Configuring Camera Control Settings”
which starts on page 56 for information)
• Home page layout settings (refer to “Configuring Homepage Layout
Settings” which starts on page 61 for information)
• Event, server and media settings (refer to Configuring Event, Server and
Media Settings” which starts on page 62 for information)
• Recording settings (refer to “Configuring Recording Settings” which starts
on page 71 for information)
• System log settings (refer to “Configuring System Log Settings” on page 74
for information)
In addition, the CEN-NVS200 allows the following:
• Viewing all system settings (refer to “Viewing System Parameters” on page
75 for information)
• Performing maintenance actions (refer to “Maintenance” which starts on
page 76 for information)
NOTE: In addition to the information provided in this manual, configuration
guidelines can also be viewed by placing the mouse cursor over the appropriate help
icon (
) on the configuration pages.