Installation guide

Crestron CEN-NVS200 Network Video Streamer
Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200
•
19
The user name and password window opens, allowing log in to the
CEN-NVS200. Refer to “Logging In to the CEN-NVS200” which starts
below for log-in information.
Logging In to the CEN-NVS200
The user name and password window allows logging in to the CEN-NVS200.
User Name and Password Window
To log in to the CEN-NVS200:
1. Enter the user name and password.
NOTE: The user name of the Administrator is permanently assigned as
admin. The default admin password is admin. For enhanced security, it is
recommended the Administrator change the default administrator password.
For information about changing the admin password, refer to “
Configuring
Security Settings” which starts on page 30.
NOTE: Setup of user accounts must be performed by the Administrator.
For information about setting up user accounts, refer to “Configuring
Security Settings” which starts on page 30.
NOTE: The user name and password are case sensitive.
2. Click OK. The home page of the CEN-NVS200 opens. Refer to
“Navigating the Home Page” which starts on the following page, for
information.