Installation guide

Network Video Streamer Crestron CEN-NVS200
16
•
Network Video Streamer: CEN-NVS200 Operations & Installation Guide – DOC. 7111E
Hardware Hookup
Make the necessary connections as called out in the illustration that follows this
paragraph. Apply power after all connections have been made.
When making connections to the CEN-NVS200, use Crestron power supplies for
Crestron equipment.
Hardware Connections for the CEN-NVS200 (Top)
LAN PoE:
To 10BASE
-
T/100BASE-TX
802.3af Compliant Power Source
P O I G X X + -:
To Peripheral Devices
,
Sensor, PTZ Camera
Hardware Connections for the CEN-NVS200 (Bottom)
MEMORY:
MMC Card Slot
AUDIO OUT:
Line Level
Output
AUDIO IN:
Line Level
Input
VIDEO
:
From Camera or Other
Composite Video Source
NOTE: To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.
NOTE: The P O I G X X + - connections use a spring clamp. Press the orange lever
to release the clamp, then insert the wire. Wire ends should be stripped 3/8”
(~ 9 mm) and inserted completely.