Installation guide

Crestron CEN-NVS100 Network Video Streamer
Restoring All Factory-Default Settings
To restore all factory-default settings, click Default below the Factory default pane
of the “Maintenance” page. The system restarts. Network settings must be
configured again on the “Network” configuration page (refer to “Configuring
Network Settings” on page 27 for information).
Upgrading Firmware
To upgrade CEN-NVS100 firmware, click Browse, locate and select the firmware
file, and then click Upgrade below the Upgrade firmware pane.
Uploading a PTZ Driver
To upload a PTZ driver, click Browse, locate and select the PTZ driver file, and then
click Upload. The uploaded PTZ driver is displayed as User uploaded driver in the
PTZ driver list on the “Camera Control” configuration page (refer to “Configuring
Camera Control Settings” on page 47 for information).
Operations & Installation Guide – DOC. 6873A Network Video Streamer: CEN-NVS100 • 65