Installation guide

Network Video Streamer Crestron CEN-NVS100
To perform maintenance actions, click Configuration on the CEN-NVS100 home
page and then click Maintenance in the left-hand column of the page. The
“Maintenance” page opens.
“Maintenance” Page
NOTE: The “Maintenance” page can also be accessed by entering the following
URL address in your Web browser:
http://Video Streamer/setup/maintain.html
Video Streamer is the host name or IP address of the CEN-NVS100.
Refer to the following sections for information about maintenance actions.
Rebooting the NVS100
To reboot the NVS100, click Reboot below the Reboot pane of the “Maintenance”
page.
Restoring Factory-Default Settings (Excluding Network
Settings)
To restore factory-default settings excluding the Network type settings on the
“Network” configuration page, click Restore below the Restore pane of the
“Maintenance” page.
64 • Network Video Streamer: CEN-NVS100 Operations & Installation Guide – DOC. 6873A