Installation guide

Crestron CEN-NVS100 Network Video Streamer
Configuring Event, Server, and Media Settings
To configure event, server, and media settings, click Configuration on the
CEN-NVS100 home page and then click Events and Servers in the left-hand
column of the page. The “Events and Servers” configuration page opens.
“Events and Servers” Page
NOTE: The “Events and Servers” configuration page can also be accessed by
entering the following URL address in your Web browser:
http://Video Streamer/setup/application.html
Video Streamer is the host name or IP address of the CEN-NVS100.
NOTE: It is recommended that server and media settings be configured before
event settings are configured.
Refer to the following sections for server, media, and event configuration guidelines.
Configuring Server Settings
Up to five servers can be configured. To configure a server:
1. In the Server Settings pane of the “Events and Servers” configuration page, click
Add.
The “Server Settings” page opens.
Operations & Installation Guide – DOC. 6873A Network Video Streamer: CEN-NVS100 • 53