Installation guide

Crestron CEN-NVS100 Network Video Streamer
“Access List” Configuration Page
NOTE: The “Access List” configuration page can be also be accessed by entering
the following URL address in your Web browser:
http://Video Streamer/setup/accesslist.html
Video Streamer is the host name or IP address of the CEN-NVS100.
Refer to the following sections for access list configuration guidelines.
Configuring the List of Allowed IP Addresses
Configure the range(s) of allowed IP addresses in the Allowed List pane of the
“Access List” configuration page.
“Access List” Configuration Page – Allowed List
1. In the Allowed List pane, enter the Starting IP Address and Ending IP
Address of the range.
2. Click Add.
3. Repeat Steps 1 and 2 for each range to be added.
NOTE: You can delete a range of IP addresses from the allowed list. Refer to
“Deleting Allowed IP Addresses” below.
Operations & Installation Guide – DOC. 6873A Network Video Streamer: CEN-NVS100 • 35