Installation guide

Network Video Streamer Crestron CEN-NVS100
MPEG-4 Media Options: (Internet Explorer only) Select the MPEG-4 media for
playback: Video and Audio, Video Only, or Audio Only.
NOTE: Audio is not supported in CEN-NVS100 version 0100i.
Select the Enable deinterlace checkbox to improve image quality. When selected,
more CPU utilization is required.
MPEG-4 Protocol Options: (Internet Explorer only) Select the desired MPEG-4
connection protocol between client and server:
NOTE: After changing and saving the setting, close your Web browser and then
reopen it.
• UDP Unicast: Allows for better real-time performance; however, some
packets may be lost due to network traffic. If there are no special
requirements, UDP Unicast is the recommended setting.
• UDP Multicast: Identical to UDP Unicast except that it saves bandwidth
while serving multiple clients at the same time.
• TCP: Not subject to packet loss and produces a more accurate video
display; however, real-time effect performance may suffer.
• HTTP: Allows the same quality as TCP and may require less network port
configuration in some network environments.
MP4 Saving Options: (Internet Explorer only) Do the following:
1. In the Folder: text entry box, enter the directory path or browse for the
directory to which you want to save MP4 recordings. The default path is
C:\Record.
2. In the File name prefix: text entry box, enter the desired text to be added as
a prefix to the file name of the recording. The default prefix is CLIP.
3. Select the Add date and time suffix to file name checkbox to append the
recording date and time as a suffix to the file name. If the checkbox is not
selected, file names are numbered consecutively.
Click Save to save the changes.
Digital Output
NOTE: If the Hide Digital Output Controls checkbox is selected on the “System”
configuration page, the Digital Output controls (ON and OFF) are not displayed on
the home page. For additional information about the “System” configuration page,
refer to “Configuring System Settings” on page 22.
To enable the digital output of the CEN-NVS100 to be triggered, click ON.
To return the digital output to the normal state, click OFF.
Video Window
The video window displays MPEG-4 or MJPEG streaming video. For information
about configuring video settings, refer to “Configuring Video Settings” on page 39.
16 • Network Video Streamer: CEN-NVS100 Operations & Installation Guide – DOC. 6873A