Specifications

Ethernet/Cresnet Interface Crestron CEN-CN
2 •• Ethernet/Cresnet Interface: CEN-CN Operations Guide - DOC. 5721
Physical Description
The CEN-CN, shown below, is housed in a black enclosure with silk-screened labels
on the front and rear panels. On the front panel are six light-emitting diodes (LEDs)
for indicating the status of the unit, the attached device(s), and the connected
Ethernet. All connections are made through on the rear panel ports, a Crestron
6-conductor modular cable and two 4-pin connector plugs are provided. There are
four rubber feet on the base of the unit for stability and to prevent slippage.
CEN-CN Physical Views
ETHERNET
TXDNETPWR RXD ERRLNK
CRESTRONCRESTRON
ETHERNET/CRESNET INTERFACEETHERNET/CRESNET INTERFACE
CEN-CNCEN-CN
CRESTRON ELECTRONICS INC. ROCKLEIGH, N.J. 07647 USACRESTRON ELECTRONICS INC. ROCKLEIGH, N.J. 07647 USA
12VDC
.5A
ETHERNETPC
NET
Y
NET
24 GZ Z GY24
NET
6.32 in
(16.06 cm)
1.70 in
(4.32 cm)
7.07 in
(17.95 cm)
CEN-CN Ports
Each CEN-CN rear panel port has a silk-screened label. For the descriptions of the
ports, refer to the diagram below and following paragraphs.
CEN-CN Rear Panel
CRESTRON ELECTRONICS INC. ROCKLEIGH, N.J. 07647 USACRESTRON ELECTRONICS INC. ROCKLEIGH, N.J. 07647 USA
12VDC
.5A
ETHERNETPC
NET
Y
NET
24 GZ Z GY24
NET