Specifications

Crestron CAPTURE-HD/CAPTURE-HD-PRO High-Definition Capture Recorder
Operations Guide – DOC. 7233F High-Definition Capture Recorder: CAPTURE-HD/CAPTURE-HD-PRO • 31
Time Settings
Time Status
Time Set Method
Time Set Method
FusionRV
Network Time
Control System
a. Select FusionRV (default) to have the device use a FusionRV server to set
the Capture recorder’s time. This option has no additional parameters.
b. Select Control System to have the device use a Crestron control system as the
time source. This option has no additional parameters.
c. Select Network Time to have the device use the Network Time Protocol to
connect to internet servers to set the device’s time. This option has additional
parameters which are detailed below.
3. Select Network Time to display the “Network Time” screen which enables
selecting the desired time zone and activating or deactivating the daylight saving
time feature.
Network Time
Time Zone
Daylight Saving Time
Time Zone
Caribbean
Europe
North America
South America
a. On the “Time Zone” screen, use the up and down buttons to highlight a
desired geographic region. There are eight regions listed. In addition to the
four shown above, the list includes Africa, Asia, Australia, and USA Off
Mainland.
b. Selecting a region produces a list of cities or general areas in that region,
each preceded by an offset time relative to the GMT reference. For example,
selecting North America yields a list of eleven cities/areas:
(-3:30)Newfoundland, (-4:00)New Brunswick, (-5:00)Eastern,
(-5:00)Montreal, (-5:00)Toronto, (-5:00)Winnepeg, (-6:00)Central,
(-7:00)Arizona, (-7:00)Mountain, (-8:00)Pacific, (-10:00)Alaska.
c. Select the closest city or area to set the proper offset and daylight saving time
rules
NOTE: If the time zone settings are changed, the unit reboots after exiting
the time zone menu.
4. Selecting Daylight Saving Time on the “Network Time” screen displays the “DST
On/Off” screen which shows the current status of that feature.
DST On / Off
DST ON
DST OFF
5. Use the up and down buttons to set the daylight saving time feature on or off as
appropriate.
6. Press BACK to exit the “Control” menu and return to Installer Mode. Press
BACK or HOME to exit Installer Mode.