Specifications

High-Definition Capture Recorder Crestron CAPTURE-HD/CAPTURE-HD-PRO
28 • High-Definition Capture Recorder: CAPTURE-HD/CAPTURE-HD-PRO Operations Guide – DOC. 7233F
Video PIP Location
From the “Video” menu, select PIP Location to display the “Video PIP Location”
screen.
Video PIP Location
Side-by-side
Upper Left
Upper Right
Lower Right
This screen enables selection of the desired location for the picture-in-picture image.
Two choices not shown above are Lower Left and Full-frame.
Video PIP Size
From the “Video” menu, select PIP Size to display the “PIP Size” screen.
PIP Size
Small
Medium
Large
This screen enables selection of the desired size for the picture-in-picture image.
Video Background Options
From the “Video” menu, select Video Background to display the “Video
Background” screen
Video Background
Camera
Content
This screen enables selection of Camera or Content as the background.
Video HDMI Output Mode
Options
From the “Video” menu, select HDMI Output Mode to display the “HDMI Output
Mode” screen
HDMI Output Mode
Confidence
Content
This screen enables selection of Confidence or Content as the HDMI output signal.
Network
The network characteristics of the Capture recorder are configured using the
“Network” menu, which is displayed by highlighting Network in the “Installer Mode”
menu and pressing SELECT.
Network Status Options
From the “Network” menu, select Status to display the “Network Status” screen.
Network Status
MAC:00107f5c4326P
IP:172.30.16.47
Sub:255.255.255.0
Def:172.30.16.1
Network
Status
IP Address
Subnet Mask
Default Router
Use this screen to review the preset MAC address of the Capture recorder and, if the
device is connected to an active Ethernet network, the current IP address, subnet mask
address, default router address, DHCP setting (on or off), the host name for the
device, and, if a control system is part of the network, the control system address (if
not defined, the address is shown as 0.0.0.0).