Specifications

High-Definition Capture Recorder Crestron CAPTURE-HD/CAPTURE-HD-PRO
22 • High-Definition Capture Recorder: CAPTURE-HD/CAPTURE-HD-PRO Operations Guide – DOC. 7233F
• A level gauge (bar graph at left side of the display) shows relative speech
level. The level can be adjusted via the CAPTURE-TPMC-4SM, the symbol,
or front panel controls. Adjust the level so that all but the top 1-2 bars are lit
while speaking. Samples are averaged so there is a slight delay in the gauge’s
response to incoming speech audio.
Installer Mode
The following paragraphs describe the various setup and information screens that are
included in the installation process for the Capture recorder. These are accessed using
the front panel display and the adjacent navigation and value adjustment push button
controls. The Capture recorder’s front panel Installer mode menu structure is shown
in the following illustration.
Installer Mode Menu Structure
Installer Mode
AUDIO
Speech Input
VIDEO
NETWORK
Status
IP Address
Subnet Mask
Default Router
DHCP
Control System
CONTROL
Restore Defaults
About
Storage
Upload
Password
Content Input
Front Panel Lock
Volume
PIP Location
PIP Size
Video Background
HDMI Output Mode
Record Options
Camera Input
Content Input
Streaming Options
Operational Mode
Time Settings
When power is first applied to the Capture recorder, the device runs an initialization
process that takes approximately two minutes (the front panel screen displays a
countdown). When this process is complete, the initial display is similar to the
following.
Initial Display
Press REC when ready
2013-03-13 16:25
No Meetings
From the initial display, press the BACK button to enter Installer mode. The
“Installer Mode” menu appears as follows.