Installation guide

Cameo Keypads Crestron C2N/C2NI-CB Series
4 • Cameo Keypads: C2N/C2NI-CB Series Operations & Installation Guide - DOC. 6560B
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest
Crestron Product Catalog for a complete list of 2-Series control systems.
3. Minimum Non 2-Series Control System Update Files:
CEN/CN/TVAV Version 5.12.63V.UPZ or later
CNMSX-AV/PRO Version 5.14.02X.UPZ or later
CNRACKX/-DP Version 5.14.02W.UPZ or later
ST-CP Version 4.02.4S.UPZ or later
CNX update files are required for either CNMSX-AV/PRO or CNRACKX/-DP.
Filenames for CNX update files have a UPZ extension, and ST-CP files are in one
EXE or zipped UPZ file. To avoid program problems, make sure you are using
the update file with the correct suffix letter (e.g., S, V, W, X).
4. Dimension includes faceplate.
5. The depth of the keypad is listed without the Cresnet connector (approximately
0.45 in) and clearance for the wiring.
NOTE: Crestron software and any files on the website are for Authorized
Crestron dealers and Crestron Authorized Independent Programmers
(CAIP) only. New users may be required to register to obtain access to
certain areas of the site (including the FTP site).
Physical Description
This section provides information on the connections, controls and
indicators available on your C2N/C2NI-CB Series keypad.
The button caps are tapered and are arranged in a shingle style with the
narrow part of the button cap at the top. Each button cap can, however,
be arranged in either orientation, and the overall keypads can be installed
with the LEDs on the right. Spacers are flat and flush with the front of the
bezel surface. Button caps are laser-engravable using the Crestron
Engraver software; spacers are not. The engraving software provides up
to three fields for each button cap to allow for the left/right and center
press functions, permits multiple lines of text, and also allows you to
specify the orientation of each button cap. The Crestron Engraver
software, Version 2.4 or later, is available from the Crestron website.
NOTE: A single button cannot be installed in the lowest position of the
keypad.
The following illustrations provide overall dimensions of the three
keypad styles.