Manualshelf

Installation guide

ManualsBrandsCrestron ManualsComputer equipmentCameo C2N-CB Series
12345678910
Cameo Keypads Crestron C2N/C2NI-CB Series
2 • Cameo Keypads: C2N/C2NI-CB Series Operations & Installation Guide - DOC. 6560B
Cameo Standard Mount
The Cameo standard mount model, C2N-CBD, is designed for
installation in a conventional electrical gang-box using a decorator style
faceplate (not included).
Cameo Flush Mount
Cameo's unique flush mount design affords a very discreet appearance
occupying just one-third the space of a conventional keypad. Employing
a smart spring clamp mounting system, the C2N-CBF Cameo flush
mount model installs easily in drywall without requiring a back box.
Cameo UK Mount
The version of the Cameo keypad designed for wall box applications
within the UK, C2NI-CBUK, may also be used anywhere a post-
construction flush-mount keypad is required.
Designer Colors
The flush mount and UK mount models are available in a palette of ten
designer colors that has been professionally formulated to harmonize
perfectly in a wide range of modern and traditional living spaces.
Customize Your Button Layout
Exquisitely simple yet extensively customizable, the Cameo keypad can
be configured easily by the installer. Each keypad is actually furnished
with an assortment of engravable button caps and blank spacers in three
different sizes to support a variety of physical layouts. The button caps
feature an ergonomically tapered shape for excellent tactile response. The
taper of each button can be oriented upward or downward, enabling two
vertically adjacent buttons to emulate the feel of a single "rocker" switch.
Define Your Functionality
Through software, each button can be individually configured to operate
in one of three possible modes: single-press, left/right rocker, or
left/center/right rocker, supporting a total of up to 18 possible button
presses on a single keypad. Six pinhead-sized white LED light pipes
provide very versatile button feedback and bargraph capability. The
LED's may be oriented to the left or right of the buttons simply by
inverting the keypad. In their "off" state, the LED's may be set to glow