Installation guide

Cameo Keypads Crestron C2N/C2NI-CB Series
24 Cameo Keypads: C2N/C2NI-CB Series Operations & Installation Guide - DOC. 6560B
selecting it from one of the toolboxes and dragging it to a room. The
available toolboxes differ depending on the View but all Views include a
"General" toolbox that allows you to add areas and rooms at any time.
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the
C2N/C2NI-CB Series keypads, it is recommended to use SystemBuilder
for configuring a system.
SIMPL Windows is Crestron’s premier software for programming
Crestron control systems. It is organized into two separate but equally
important “Managers”.
Configuration
Manager
Configuration Manager is the view where programmers “build” a
Crestron control system by selecting hardware from the Device Library.
To incorporate the C2N/C2NI-CB keypad into the system, drag the
C2N-CB icon, which includes all models, from the Wired Keypads
folder of the Device Library and drop it in the System Views.
Locating the C2N-CB in the Device Library
The system tree of the control system displays the device in the
appropriate slot with a default Net ID as shown in the following
illustration.