Installation guide
Crestron C2N/C2NI-CB Series Cameo Keypads
Operations & Installation Guide - DOC. 6560B Cameo Keypads: C2N/C2NI-CB Series • 13
LED
Light
Pipes
Cover
Screw
Rear Housing
and Switch
Assembly
Button Caps
and Spacers
Plastic Button
Support
Bezel
LED
Holes
5. Attach the spring clamp to the rear of the keypad, as shown in
the following figure, by loosening the screws sufficiently to
place the clamp over the screws and slide it down into position,
and then retighten the screws.
Loosen
Screws
Spring
Clamp