Installation guide

Crestron C2N-SSC-2 Somfy Shade Controller
Somfy
®
Shade Controller:
C2N-SSC-2
Introduction
Features and Functions
• Control up to two shades per Shade Controller
• Control position and direction of each shade individually
• Store and recall up to 20 presets per shade
• Connect via one 4-pin RJ-11 interface connector per shade
• Control shades in multi-unit installations individually, in
groups, all together, or any desired combination.
The C2N-SSC-2 Somfy
®
Shade Controller is a compact Cresnet
®
device
designed to provide a bidirectional serial interface for up to two Somfy
ILT Intelligent Shade Motors. Window treatments equipped with the
Somfy ILT motor offer enhanced capability compared to typical three-
wire models.
In addition to basic open/close commands, the C2N-SSC-2 allows for
setting each shade to a specific position and polling for its current
position with 16-bit precision. Feedback signals provide confirmation of
each motor's activity to enable precise, predictable control, even from a
remote location. Limit adjustments are set electronically using buttons
provided on the face of the unit, and up to 20 presets for each output can
be saved onboard the C2N-SSC-2 for easy recall through the control
system. The C2N-SSC-2 mounts discreetly to any flat surface and
requires a simple Cresnet connection to the control system.
Operations & Installation Guide - DOC. 6318B Somfy Shade Controller: C2N-SSC-2 • 1