Installation guide

Crestron C2N-SSC-2 Somfy Shade Controller
Programming is organized into six system Views of the lighting system,
each providing a moveable toolbox of devices such as interfaces, fixtures
and control modules. You can add a device to your system simply by
selecting it from one of the toolboxes and dragging it to a room. The
available toolboxes differ depending on the View but all Views include a
"General" toolbox that allows you to add areas and rooms at any time.
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the C2N-SSC-2,
it is recommended to use SystemBuilder for configuring a system.
SIMPL Windows is Crestron’s premier software for programming
Crestron control systems. It is organized into two separate but equally
important “Managers”.
Configuration
Manager
Configuration Manager is the view where programmers “build” a
Crestron control system by selecting hardware from the Device Library.
1. To incorporate the C2N-SSC-2 into the system, drag the
C2N-SSC-2 from the Cresnet Shade/Drape Controllers folder of
the Device Library and drop it in the System Views.
Locating the C2N-SSC-2C in the Device Library
Operations & Installation Guide - DOC. 6318B Somfy Shade Controller: C2N-SSC-2 • 11