Installation guide

Crestron C2N-IRGW-F IR Gateway
Software (Continued)
TASK REQUIRED SOFTWARE
VERSION
Program with simple
wizards for systems using
a C2N-IRGW-F
(optional but
recommended).
Crestron D3 Pro™ version 2.1.7
or later with D3 Pro Templates
version 2.0.1 or later or
SystemBuilder™ version 2.0.6 or
later with SystemBuilder
Templates version 2.0.3 or later.
Refer to software release notes or
Crestron website for other
required Crestron software
packages.
Programming with Crestron D3 Pro or
SystemBuilder
Crestron D3 Pro or SystemBuilder is the easiest method of programming,
but does not offer as much flexibility as SIMPL Windows. For additional
details, download D3 Pro or SystemBuilder from the Crestron website
and examine the extensive help files.
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the
C2N-IRGW-F, it is recommended to use Crestron D3 Pro or
SystemBuilder for configuring a system.
SIMPL Windows is Crestron’s premier software for programming
Crestron control systems. It is organized into two separate but equally
important “Managers”.
Configuration
Manager
Configuration Manager is the view where programmers “build” a
Crestron control system by selecting hardware from the Device Library.
• To incorporate the C2N-IRGW-F into the system, drag the
C2N-IRGW from the Wireless Receivers | Wireless Receivers (IR)
folder of the Device Library and drop it in the System Views.
Operations & Installation Guide – DOC. 6574A IR Gateway: C2N-IRGW-F • 15