Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Operations & Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2007 Crestron Electronics, Inc.
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Contents IR Gateway: C2N-IRGW-1G & C2N-IRGW-F 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications .............................................................................................................. 1 Physical Description..
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway IR Gateway: C2N-IRGW-1G & C2N-IRGW-F Introduction Features and Functions • • • • • • • 1-way infrared receiver for Crestron® IR wireless handheld remotes and touchpanels Compatible with any third-party IR remote utilizing the RC5 command set Smoked plastic face provides neutral appearance suitable for use with any color scheme Seamless Cresnet® integration Compatible with any 2-Series control device Compatible with standard electrical gang boxes and Decora® s
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F C2N-IRGW-1G & C2N-IRGW-F Specifications (Continued) SPECIFICATION DETAILS IR Wireless (continued) IR Range Up to 50 ft line of sight (typical), dependent upon angle, obstructions, IR interference and IR remote signal strength Power Requirements Cresnet Power Usage 1 Watt (0.042 Amps @ 24 Volts DC) Default Net ID 2D Minimum 2-Series Control System Update File1, 2 Version 3.
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Physical Description This section provides information on the connections, controls, and indicators available on your C2N-IRGW-1G and C2N-IRGW-F. C2N-IRGW-1G Physical View (Faceplate not included) C2N-IRGW-F Physical View Operations & Installation Guide – DOC.
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F C2N-IRGW-1G Overall Dimensions 1 2 3 3.28 in (8.33 cm) 4.13 in (10.48 cm) 0.25 in (0.62 cm) 0.79 in (1.99 cm) 3.81 in (9.68 cm) 1.75 in (4.45 cm) 1.12 in (2.83 cm) C2N-IRGW-F Overall Dimensions 1.59 in (4.03 cm) 2.19 in (5.54 cm) 1.50 in (3.81 cm) 1 2 4 • IR Gateway: C2N-IRGW-1G & C2N-IRGW-F 3 11" 4-wire pigtail (to Cresnet) Operations & Installation Guide – DOC.
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Connectors, Controls & Indicators # CONNECTORS, CONTROLS & INDICATORS 1 SETUP BUTTON 2 LED 3 DESCRIPTION Recessed miniature pushbutton for setup. (Can be pressed with a paper clip.) (1 red) Indicates IR signal reception, Cresnet network communication and setup/update. LED location shown; not visible unless lit. C2N-IRGW-1G: NET Four-position terminal block connector for data and power. Connects to Cresnet control network.
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators).
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway C2N-IRGW-1G & C2N-IRGW-F Horizontal Reception Angle (Distance will depend on the remote/transmitter) 20 0 10 10 20 30 30 40 40 50 50 60 60 70 70 80 80 90 90 Wall C2N-IRGW-1G & C2N-IRGW-F Vertical Reception Angle (Distance will depend on the remote/transmitter) 90 80 70 60 50 40 30 20 10 Wall 0 10 20 Floor 30 40 50 60 90 Operations & Installation Guide – DOC.
IR Gateway Installing a C2N-IRGW-1G Crestron C2N-IRGW-1G & C2N-IRGW-F The following tools/hardware are required for installation of a C2N-IRGW-1G. • Cresnet network cable (not supplied) • Cresnet connector (supplied) • Screwdriver (not supplied) • Two ¾ in.
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway 3. Attach the C2N-IRGW-1G to the electrical box using the supplied two ¾ in. combo head screws. 4. Attach faceplate. 5. Turn Cresnet system power ON. NOTE: To ensure proper operation, the C2N-IRGW-1G should not be painted. Installing a C2N-IRGW-F The following tools/hardware are required for installation of a C2N-IRGW-F.
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F Hardware Hookup Make the necessary connection as called out in the illustrations that follow this paragraph. Refer to “Network Wiring” on page 6 before attaching the 4-position terminal block connector from the C2N-IRGW-1G or connecting the pigtail wires from the C2N-IRGW-F. Apply power after the connection has been made. When making the connection to the C2N-IRGW-1G and C2N-IRGW-F, use Crestron power supplies for Crestron equipment.
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Universal Remotes Any universal remote transmitting RC5 code (and some Sharp codes) can communicate with the Crestron control system and allow the user to select and activate any function in the control system. An RC5 code is 14 bits long. Each code includes a 5-bit address (or system) and a 6-bit command. Sharp uses a different IR protocol, but some of their codes are acceptable. NOTE: The Philips Pronto contains built-in RC5 commands for out-of-the-box use.
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F “Identify Transmitter” Window 5. Point the universal remote at the C2N-IRGW-1G or C2N-IRGW-F and program the remote with an RC5 code (some Sharp codes are acceptable as well) as outlined in the manufacturer's manual. NOTE: Crestron recommends that codes from manufacturers other than the manufacturer of the device being controlled be used to avoid IR transmission conflict.
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Positive Transmitter Identification The next logical question is, “What is the Button ID?” The purpose of this next procedure is to map the buttons on the universal remote so that a list can be generated and used for reference when creating the SIMPL Windows program. A decimal identification number (or Button ID (Decimal) as shown in the “Identify Transmitter” window) corresponds to each physical press on the universal remote.
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Programming with SIMPL Windows NOTE: While SIMPL Windows can be used to program the C2N-IRGW-1G and C2N-IRGW-F, it is recommended to use Crestron D3 Pro or SystemBuilder for configuring a system. SIMPL Windows is Crestron’s premier software for programming Crestron control systems. It is organized into two separate, but equally important “Managers”.
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F “C2N-IRGW Device Settings” Window • Program Manager The ID code specified in the SIMPL Windows program must match the Net ID of each unit. Program Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View. A description for each signal in the symbol is described in the SIMPL Windows help file (F1).
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade, it is necessary to establish communication. Once communication has been established, files (for example, programs or firmware) can be transferred to the control system (and/or device).
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F • Establish serial communications with the C2N-IRGW-1G or C2N-IRGW-F and display the “System Info” window. • Select Functions | Firmware… to upgrade the C2N-IRGW-1G or C2N-IRGW-F firmware. Program Checks Display the network device tree (Tools | Network Device Tree) to show all network devices connected to the control system. Right-click on the C2N-IRGW-1G or C2N-IRGW-F to display actions that can be performed on the C2N-IRGW-1G or C2N-IRGW-F.
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. C2N-IRGW-1G & C2N-IRGW-F Troubleshooting TROUBLE Device does not function. LED does not illuminate when remote is transmitting. Intermittent response when remote is transmitting.
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F chained must be added together to determine the Cresnet power usage of the entire chain. If the unit is a home-run from a Crestron system power supply network port, the Cresnet power usage of that unit is the Cresnet power usage of the entire run. The wire gauge and the Cresnet power usage of the run should be used in the following equation to calculate the cable length value on the equation’s left side.
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Future Updates As Crestron improves functions, adds new features and extends the capabilities of the C2N-IRGW-1G and C2N-IRGW-F, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. Check the Crestron website periodically for manual update availability and its relevance.
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F Appendix: Mapping Table Use this table when mapping the buttons on the universal remote. The list can then be used as a reference when creating the SIMPL Windows program. PHYSICAL DEVICE BEING CONTROLLED: TRANSMITTER ID (HEX): BUTTON TITLE ON UNIVERSAL REMOTE BUTTON ID (DECIMAL) Sheet 22 • IR Gateway: C2N-IRGW-1G & C2N-IRGW-F of Operations & Installation Guide – DOC.
Crestron C2N-IRGW-1G & C2N-IRGW-F IR Gateway Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide – DOC. 6468A (2014708) 02.07 Specifications subject to change without notice.
