Installation guide

Crestron C2N-FT-TPS4/TPS4-U FlipTop Touchpanel Control Center
2. Once communication is established, the Functions menu becomes
available.
3. Select Functions | SIMPL Program…The “SIMPL Program” window
appears, as shown in the following figure, and permits you to browse for a
compiled program file (.spz), and to upload it to internal flash.
“SIMPL Program” Window
4. Browse for the appropriate .spz file in the “Open” window, and click Open.
“Open” Window
5. When the “SIMPL Program” window reappears, click Send.
6. To verify that the program has been transferred successfully, select
Functions | SIMPL Program. Details about the current program loaded in
the control system are displayed in the upper left corner of the “SIMPL
Program” window.
Operations & Installation Guide – DOC. 6398 FlipTop Touchpanel Control center: C2N-FT-TPS4/TPS4-U • 25