Crestron C2N-DEMO Interface Case Reference Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names, and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
Crestron C2N-DEMO Interface Case Demonstration Case Contents Crestron Demonstration Case: C2N-DEMO Interface Case 1 Introduction ............................................................................................................................... 1 Features and Functions................................................................................................ 1 Case Contents ..............................................................................................................
Crestron C2N-DEMO Interface Case Demonstration Case Crestron Demonstration Case: C2N-DEMO Interface Case Introduction Features and Functions The Crestron® C2N-DEMO Interface Case (herein known as the Interface Case) is a pre-programmed Crestron system in a portable case. It is designed with the sales person in mind to give customers an understanding of how Crestron keypads and touchpanel interfaces can be incorporated into their audio-visual and automation systems.
Demonstration Case Crestron C2N-DEMO Interface Case Case Contents The following table summarizes the products contained within the Interface Case.
Crestron C2N-DEMO Interface Case Demonstration Case Right click on the icon for your Ethernet adapter and select Properties. Highlight the Internet Protocol (TCP/IP) selection and click the Properties button. Select the radio button labeled Use the following IP address: and enter in the following information. “Internet Protocol (TCP/IP) Properties” Window Click on OK to exit and save settings. 4.
Demonstration Case Crestron C2N-DEMO Interface Case System Functionality This section describes each interface and how it is intended to function. This information should be useful in how you approach your sales presentation, enabling you to concentrate on the features most relevant to your customer. CNX-B2 1.5360" 1.536 2.9119" 2.912 1.067 1.0670" 4.762 4.7619" DINNER PARTY MUSIC This interface was programmed as a secondary interface for the dining room in this system.
Crestron C2N-DEMO Interface Case Demonstration Case CNX-B4 1.5360" 1.536 2.9119" 2.912 1.067 1.0670" LIGHTING OVERRIDE 4.762 4.7619" LIGHTS TEMP TEMP This interface was programmed as a secondary interface for the master bedroom. The entire virtual house can be monitored from the web page project associated with this system. Button 1 (LIGHTS) This button turns the master bedroom lights to a preset level. The LED feedback light illuminates when this level is obtained.
Demonstration Case Crestron C2N-DEMO Interface Case CNX-B6 1.536 1.5360" 2.912 2.9119" MORNING EVENING VANITY DOWN LIGHTS FAN ALL OFF 1.0670" 4.762 4.7619" 1.067 This interface was programmed as the primary control point for the guest bathroom. The entire virtual house can be monitored from the web page project associated with this system. Button 1 (MORNING) This button turns the guest bathroom lights to a preset level. The LED feedback light illuminates when this level is obtained.
Crestron C2N-DEMO Interface Case Demonstration Case CNX-B8 2.9119" 2.912 1.067 DINNER PARTY CHAND SCONCE DOWN LIGHTS MUSIC SOURCE 1.0670" 4.762 4.7619" 1.536 1.5360" VOL VOL This interface was programmed as the primary control point for the dining room. The entire virtual house can be monitored from the web page project associated with this system. Button 1 (DINNER PARTY) This button turns the dining room lights to a preset level.
Demonstration Case Crestron C2N-DEMO Interface Case selection of each new source. This demonstrates how even a simple interface such a keypad can give detailed feedback information. Button 8 (VOL J) This button decreases the volume level of the virtual audio system. The feedback LED illuminates only while the button is pressed. CNX-B12 1.536 2.912 2.9119" MORN 1.067 1.0670" DOWN NOON VANITY EVEN CLOSETS RELAX FAN MUSIC VOL + SOURCE VOL - 4.762 4.7619" 1.
Crestron C2N-DEMO Interface Case Demonstration Case Button 5 (EVEN) This button turns the master bathroom lights to a preset level. The LED feedback light illuminates when this level is obtained. Button 6 (CLOSETS) This button toggles the closet lights off and on with a two second fade time. The feedback LED illuminates anytime the light level is greater than 0%. Button 7 (RELAX) This button turns the master bathroom lights to a preset level.
Demonstration Case Crestron C2N-DEMO Interface Case C2N-DB6 4.158 FRONT LAMP REAR FAN FAMILY PARTY 1.067 1.696 2.696 1.788 1.532 This interface was programmed as the primary control point for the family room. The entire virtual house can be monitored from the web page project associated with this system. Button 1 (FRONT) This button toggles the front down lights off and on with a two second fade time. The feedback LED illuminates anytime the light level is greater than 0%.
Crestron C2N-DEMO Interface Case Demonstration Case C2N-DB8 4.158 HOME AWAY PATH PORCH MUSIC VOL + SRC VOL - 1.067 1.696 2.696 1.788 1.532 This interface was programmed as the primary control point for the entry. The entire virtual house can be monitored from the web page project associated with this system. Button 1 (HOME) This button turns various lights around the house to a preset level. The LED feedback light illuminates when this level is obtained.
Demonstration Case Crestron C2N-DEMO Interface Case Button 7 (SRC) This button cycles through the various virtual audio sources. The feedback LED illuminates only while the button is pressed. Audio WAV files are triggered with the selection of each new source. This demonstrates how even a simple interface such a keypad can give detailed feedback information. Button 8 (VOL -) This button decreases the volume level of the virtual audio system. The feedback LED illuminates only while the button is pressed.
Crestron C2N-DEMO Interface Case Demonstration Case Button 5 (PATH) This button turns various lights around the house to a preset level. The LED feedback light illuminates when this level is obtained. Button 6 (LOWER) This button ramps down the light level of the last fixture selected from this keypad (Down / Lamp). This process takes five seconds from a level of 100% to reach 0%. Button 7 (XM) This button turns on the virtual audio system and selects the XM radio for the source.
Demonstration Case Crestron C2N-DEMO Interface Case Appendix: Factory Settings The C2N-DEMO Interface Case ships completely configured. In the event that the original factory settings are altered, corrupted, or erased, the following information is necessary for reconfiguring the processor in the case. • IP address is 192.168.40.11 • Subnet mask is 255.255.255.0 • Default router is 192.168.40.10 14 • Crestron Demonstration Case: C2N-DEMO Interface Case Reference Guide – DOC.
Crestron C2N-DEMO Interface Case Demonstration Case Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Reference Guide – DOC. 6281 09.04 Specifications subject to change without notice.
