Installation guide

Crestron C2N-DBN12 & C2N-DBF12 Decorator Wall Panels
Operations & Installation Guide - DOC. 6200 Decorator Wall Panels: C2N-DBN12 & C2N-DBF12 • 27
File Transfer | Update Touchpanel/Keypad Firmware Command
3. As shown in the “Select Network ID” window, select the Net
ID of the C2N-DBF12, and then click OK. The “Open”
window appears (refer to the graphics below and on the next
page).
“Select Network ID” Window
NOTE: If problems arise when transferring any Cresnet file (touchpanel
project/firmware), lower the port speed baud rate to 38400 to match the
Cresnet bus speed.