Installation guide

Decorator Wall Panels Crestron C2N-DBN12 & C2N-DBF12
16 • Decorator Wall Panels: C2N-DBN12 & C2N-DBF12 Operations & Installation Guide - DOC. 6200
SIMPL Windows offers drag and drop functionality in a familiar
Windows

environment.
This section explains how to create a SIMPL Windows program that
includes a wall panel.
Configuration Manager is where programmers “build” a Crestron control
system by selecting hardware from the Device Library. In Configuration
Manager, drag the PRO2 from the Control Systems folder of the Device
Library and drop it in the upper pane of the System Views. The PRO2
with its associated communication ports is displayed in the System Views
upper pane.
PRO2 System View
The System Views lower pane displays the PRO2 system tree. This tree
can be expanded to display and configure the communications ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate a C2N-DBF12 into the system, drag the C2N-DBF12
from the Wired Keypad folder of the Device Library and drop it in
System Views. The PRO2 system tree displays the C2N-DBF12 in Slot 9,
with a default Net ID of 71 as shown in the illustration on the next page.