Installation guide

Decorator Keypads Crestron C2N-DBF12 & C2N-DBN12
16
•
Decorator Keypads: C2N-DBF/N12 Operations & Installation Guide – DOC. 6200C
NOTE: The ID code specified in the SIMPL Windows program
must match the Net ID of each unit. Refer to “Identity Code” on
page 8
.
Program
Manager
Program Manager is the view where programmers “program” a
Crestron control system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it
into Detail View. Each signal in the symbol is described in the SIMPL
Windows help file (F1).